Pluralsight – Inventor Essentials – Visual Styles, Visualization, and Graphics

September 22, 2016, 7:48 am

≫ Next: DxO Labs DxO Optics Pro v11 2

≪ Previous: Pluralsight - Inventor Essentials Visual Styles Visualization and Graphics

$

0

0

Whether you're interested in better understanding the graphical capabilities of Inventor or just need to make your model look appealing for a client, this course will guide you through graphics in Autodesk Inventor.

With Adobe Inventor, you can make your designs look appealing on screen and easily manipulate different visual styles to assist with the design process. This course, Inventor Essentials - Visual Styles, Visualization, and Graphics, will guide you through the numerous visual styles and appearance settings available to you in Autodesk Inventor. It will start by going over the relevant Inventor application options, helping you to understand the settings that dictate the visuals. You'll then move onto visual styles and display states that alter how your 3D models are presented on screen as you're working on them. You'll also go over aesthetics such as lighting styles, ambient environments, and shadow control before finishing it up with an overview of the ray tracing module. By the end of this course, you'll be ready to start making graphics in Autodesk Inventor that will help sell your designs.

Software required: Inventor 2017.

https://www.pluralsight.com/courses/inventor-essentials-visual-styles-visualization-graphics

---

DxO Labs DxO Optics Pro v11 2

September 22, 2016, 9:16 am

≫ Next: Thinkbox Krakatoa MY v2 6 2 WIN/LINUX

≪ Previous: Pluralsight – Inventor Essentials – Visual Styles, Visualization, and Graphics

$

0

0

*RELEASE DESCRIPTION*

Thanks to DxO OpticsPro`s exclusive technologies
instantly correct all the optical defects of your
equipment, remove digital noise even at high
sensitivities, recover fine details and textures in dark
or burnt areas, and bring out all the nuances of color in
your images. With DxO OpticsPro`s outstanding
performance, bring out the best in your RAW and JPEG
photos in just a few clicks, regardless of shooting
conditions.

http://www.dxo.com/us/photography/photo-software/dxo-opticspro

*HOW TO INSTALL/RUN THIS RELEASE*

1. Unzip, unrar and run setup/install
2. Enjoy!

If dotNET 4.6 is needed, you can find it in _redist.rar

*NOTE*

Seed till you Bleed!

Thinkbox Krakatoa MY v2 6 2 WIN/LINUX

September 22, 2016, 12:30 pm

≫ Next: Autodesk Stingray 1.5

≪ Previous: DxO Labs DxO Optics Pro v11 2

$

0

0

*RELEASE DESCRIPTION*

Krakatoa for Autodesk Maya (also known as Krakatoa MY or KMY for short)
is a volumetric particle rendering plugin inplemented using the C
Interface to Thinkbox Software's Krakatoa renderer for Linux, Mac OSX and
Microsoft Windows operating systems.

The first public Build 2.1.7.50419 was released on February 21st, 2013
Note that the release number matches the Krakatoa core renderer version
shared with Krakatoa MX and Krakatoa SR. All Krakatoa implementations
share the same rendering core and should produce identical, pixel-exact
output given the same particle data and settings. The latest build is
v2.3.0.54157 released on December 17th, 2013.

Krakatoa MY is fully integrated in the Maya User Interface. It implements
various dedicated scene objects like a PRT Loader for loading particles
from external file sequences, PRT Volume and PRT Surface for converting
geometry volumes and surfaces to point clouds. v2.3.0 introduced support
for the Magma node-based channel editing system, allowing complex
operations on large numbers of particles, data acquisition from other
particles and scene meshes and so on.

http://www.thinkboxsoftware.com/krakatoa-my-overview

*HOW TO INSTALL/RUN THIS RELEASE*

1 - Unpack the release into a directory of your choice
2 - Run the installer and install it
3 - See included amped.txt
4 - Enjoy this fine AMPED release, but buy it if you will use it
5 - As always, make sure to have a firewall to block outbound connections

*NOTE*

Seed till you Bleed!

Autodesk Stingray 1.5

September 22, 2016, 6:29 pm

≫ Next: InfiniteSkills – Integrating Lightroom with Photoshop

≪ Previous: Thinkbox Krakatoa MY v2 6 2 WIN/LINUX

$

0

0

Game Engine

InfiniteSkills – Integrating Lightroom with Photoshop

September 22, 2016, 11:26 pm

≫ Next: InfiniteSkills – Component Design with Autodesk Fusion 360

≪ Previous: Autodesk Stingray 1.5

$

0

0

Can two applications be better than one? Yes, says design expert Andy Anderson. In this class, he'll show you how to combine the toolsets of Adobe Photoshop and Adobe Lightroom into a single, super efficient image editing workflow. You'll understand why you should always work with Lightroom first before working in Photoshop, and how to move between the two in efficient and creative ways.

Learners should have current versions of Lightroom and Photoshop; know how to open the programs and perform basic editing; and, if they intend to do image editing in conjunction with mobile apps, a smart device with the ability to connect to the Internet.

* Learn how to combine Photoshop & Lightroom into a cohesive image editing workflow

* Master the ability to create the best images possible in the least amount of time

* Understand how to sync the two applications, organize images, and edit images

* Discover how to efficiently and successfully use Photoshop & Lightroom with mobile apps

* Gain speed in the editing process by learning the strengths of Photoshop and Lightroom

http://www.infiniteskills.com/training/integrating-lightroom-with-photoshop.html

InfiniteSkills – Component Design with Autodesk Fusion 360

September 22, 2016, 11:49 pm

≫ Next: Gilberto Magno Games Workshop (Spanish)

≪ Previous: InfiniteSkills – Integrating Lightroom with Photoshop

$

0

0

This course focuses on the tools and techniques needed to produce accurate 3D component designs, industry standard technical documentation, and compelling 3D design presentations. It features extensive lessons on building bodies, rendering, assembling design workflows, and creating animations, drawings, and simulations.

You'll learn how to build components that are accurate real-world representations, create photo-realistic renderings of designs, apply animations to designs, produce drawings of designs that incorporate proper technical documentation, and simulate environments for stress testing designs before manufacturing.

* Learn what bodies and components are and how to use both in 3D design

* Explore the rendering and animation tools used to create compelling design presentations

* Understand assembly design using components and applying joints

* Learn to use the drawing environment to create proper manufacturing documentation

* Discover how the simulation environment is used to stress test designs

http://www.infiniteskills.com/training/component-design-with-autodesk-fusion-360.html

Gilberto Magno Games Workshop (Spanish)

September 23, 2016, 12:36 am

≫ Next: SketchUp Pro 2016 v16.1.2418 Mac

≪ Previous: InfiniteSkills – Component Design with Autodesk Fusion 360

$

0

0

Gilberto Magno's Game Character Workshop. It's Spanish, but i think it can be still useful even if you don't understand the language.

http://gilbertomagno.com/workshop-games/

SketchUp Pro 2016 v16.1.2418 Mac

September 23, 2016, 1:12 am

≫ Next: Pluralsight – Introduction to Revit for Structural Engineers

≪ Previous: Gilberto Magno Games Workshop (Spanish)

$

0

0

A set of simple tools and the involvement of the intellectual system of drawing makes it easy to create and edit models and export them to create video or print the results.

Instead of imposing the values of the coordinates, you can use the multi-function control system of the location of the object using the tag text prompts, lines of different colors. Using tools as close to real life, it is so much easier to learn and, most importantly, remember how to use them.

Trimble Connect
Trimble Connect is a new way to store, sync, reference, share, and collaborate on design/build projects. Sign up for a free account, then start uploading .skp, .pdf, .dxf, .ifc… however you work, Trimble Connect helps you work smarter together.

Reload 3D Warehouse models
In SketchUp 2016, 3D Warehouse models can work as reference objects in any project. Download a model from 3D Warehouse, then reload it to update changes to every instance of that component.

Generate Report 2.0
We thought you should have more control of what information SketchUp Pro exports from models, and how it’s organized. So we reworked ‘Generate Report’ tool to do just that.

LayOut cloud references
With this release, LayOut’s reference objects are web friendly. That means your LayOut projects can reference and update files that are stored and synced with services like Dropbox, Google Drive, and Trimble Connect Sync.

A new LayOut API
We’re proud to announce our first step towards an extension ecosystem for LayOut. Using this new API developers can now create and customize .layout files from SketchUp models.

Website: http://www.sketchup.com/products/sketchup-pro


** NOTES **

• This is Mac version. I don't have any new Windows version, as of yet.

• I don't use Mac, so I can't test any of this for you. If you have any issues, or if you need tech support or have questions, ask others here or perhaps try here (only Forums page I could find):

https://forum.cgpersia.com/f37/sketchup-pro-2016-a-105056/

• Please give this torrent a good couple of hours to upload.

I seed continually, but it takes a little time. "Pls seed" comments will likely get you Warned.

• Support the official software, if and when you can. Esp. for commercial use.

---

Pluralsight – Introduction to Revit for Structural Engineers

September 23, 2016, 6:10 am

≫ Next: GenArts Sapphire v10 0 For AfterEffects WIN/MAC

≪ Previous: SketchUp Pro 2016 v16.1.2418 Mac

$

0

0

Have you heard of Revit but never had the time or resources to learn how to use it? This course, Introduction to Revit for Structural Engineers, will bring you up to speed and help you to create better buildings. First, you will learn how to model simple structural elements and more real-life complex examples. Next, you will discover how to use Revit as a Building Information Modeling tool. Finally, you will learn about design options and you will learn to present clear, clean, crisp drawing sets that you can be proud of. When you're finished with this course, you'll not only have modeled a sports stadium, but you will also have the skills to model real-life projects in your office.

Software required: Autodesk Revit (2017 preferred).

https://www.pluralsight.com/courses/revit-structural-engineers-introduction

GenArts Sapphire v10 0 For AfterEffects WIN/MAC

September 23, 2016, 7:32 am

≫ Next: FACERIG PRO V1 757

≪ Previous: Pluralsight – Introduction to Revit for Structural Engineers

$

0

0

*RELEASE DESCRIPTION*

Simulate light leaking into the frame for an organic effect more subtle
than a lens flare. Control the color and movement of the lights to add
nostalgic warmth and energy to your work.

Add a variety of natural-looking elements to dirty up a shot, add
sophisticated vignettes, or create complex textures. Choose from a
variety of categories: cracks, stains, frost, and more, which can be
combined and animated.

Builder allows you to create your own effects and transitions by
combining existing Sapphire effects!

Found within S_Effect and S_Transition, the enhanced preset browser is
based on a looks first workflow so that users can now browse all Sapphire
presets at once, and can view presets by groups, such as 'color
correction' or 'damage'. Plus, users can apply their chosen presets
directly onto their footage for improved efficiency.

Simulate digital playback errors, digital noise, compression errors, and
glitches. This effect also works well on text or titles.

Updated with two additional modes: twitchy and jumpy and new channel
parameters allow for color channel separation as the shaking occurs. This
effect also works well on text or titles.

http://www.genarts.com/sapphire

*HOW TO INSTALL/RUN THIS RELEASE*

1 - Unpack the release into a directory of your choice
2 - Run the installer and install it
3 - See included amped.txt
4 - Enjoy this fine AMPED release, but buy it if you will use it
5 - As always, make sure to have a firewall to block outbound connections

*NOTE*

Seed till you Bleed!

FACERIG PRO V1 757

September 23, 2016, 11:18 am

≫ Next: TEKLA STRUCTURES V2016i WIN64

≪ Previous: GenArts Sapphire v10 0 For AfterEffects WIN/MAC

$

0

0

*RELEASE DESCRIPTION*

FaceRig is a program enabling anyone with a webcam to digitally embody
awesome characters. It is meant to be an open creation platform so
everybody can make their own characters, backgrounds or props and import
them into FaceRig.

The program is now multi language: English, Japanese, Spanish, French
German, Russian, Simplified Chinese and Italian.

http://store.steampowered.com/app/274920/

Changelog:

v1.757
no info
v1.753
new avatar: Nox the Puppet
Bugfixes
v1.733
more props: football helmet, the bullhorn, the glove and
the warning light, rose hair accessory, story book
v1.723
Steam Achievements + minor tweaks
v1.637 13.7.2016
Several bugfixes
v1.601 22.6.2016
New avatar: Tallah the Mage
v1.587 14.6.2016
Several bugfixes

*HOW TO INSTALL/RUN THIS RELEASE*

1. Unpack & burn/mount disk
2. Read .txt from /MAGNiTUDE dir
3. Enjoy!

*NOTE*

Seed till you Bleed!

TEKLA STRUCTURES V2016i WIN64

September 23, 2016, 11:21 am

≫ Next: Blending SakimiChan tutorial

≪ Previous: FACERIG PRO V1 757

$

0

0

*RELEASE DESCRIPTION*

Tekla Structures is Building Information Modeling (BIM) software that
enables the creation and management of accurately detailed, highly
constructable 3D structural models regardless of material or
structural complexity. Tekla models can be used to cover the entire
building process from conceptual design to fabrication, erection and
construction management.

Tekla Structures is one product available in different configurations
and localized environments that provide specialized set of
functionality to suit the segment and culture-specific needs of
the construction industry.

https://www.tekla.com/products/tekla-structures

*HOW TO INSTALL/RUN THIS RELEASE*

1) unRAR, burn/mount image
2) check "MAGNiTUDE.txt" from "\MAGNiTUDE" dir
3) enjoy another fine MAGNiTUDE-release!

*NOTE*

Seed till you Bleed!

Blending SakimiChan tutorial

September 23, 2016, 1:54 pm

≫ Next: Leica.GEO.Office.v8.3.0.0.13017

≪ Previous: TEKLA STRUCTURES V2016i WIN64

$

0

0

Blending voice tutorial sakimichan

Leica.GEO.Office.v8.3.0.0.13017

September 23, 2016, 4:17 pm

≫ Next: Gumroad - Portrait of Marina Nery by Irakli Nadar

≪ Previous: Blending SakimiChan tutorial

$

0

0

Leica Geo Office - one integrated Office Software

Get best results by managing and combining your data with Leica Geo Office. You just need to import and combine your data from all your instruments to produce the final results.

GNSS instrument support
TPS instrument support
Level instrument support

Best-in-class processing options
Years of experience in the fields of surveying and GNSS data processing resulted in the world’s most powerful processing options.

GNSS data processing using SmartCheck techniques
TPS processing – from simple station updates to complex traverses
Level processing
Combined network adjustments
COGO calculations, datum transformations and volume calculations

All components integrated in one software
Leica Geo Office enables you to manage your project in an integrated way. No need to transfer data between the various modules.

Use GNSS processing to automatically update SmartStation set ups
Combine GNSS and terrestrial data with an integrated Least Squares Adjustment
Benefit from volume calculations being instantly updated whenever coordinates change

more info:
http://leica-geosystems.com/products/total-stations/software/leica-geo-office

Gumroad - Portrait of Marina Nery by Irakli Nadar

September 23, 2016, 5:54 pm

≫ Next: Unreal - Side Scroller Shooter Kit

≪ Previous: Leica.GEO.Office.v8.3.0.0.13017

$

0

0

1 hour painting video process time-lapse with hardcoded notes

- Hi-resolution image

- Notes with timecode

- Skin texture brushes

Original Reference by Paul Morel

http://www.anonymz.com/?https://gumroad.com/l/vUXV#

I checked through tags. I'm not sure if someone already uploaded this and I missed it. But oh well :X
This is also my first torrent. I apologize if I messed something up. If so, please tell me how to fix my mistake(s).

---

Unreal - Side Scroller Shooter Kit

September 23, 2016, 8:34 pm

≫ Next: Unreal - Side Scroller Shooter Kit (zip)

≪ Previous: Gumroad - Portrait of Marina Nery by Irakli Nadar

$

0

0

https://www.youtube.com/watch?v=dMFhNfkLmH4

Hopefully this will work this time. Otherwise I give up.

Unreal - Side Scroller Shooter Kit (zip)

September 23, 2016, 9:54 pm

≫ Next: Pluralsight – After Effects CC Rotoscoping

≪ Previous: Unreal - Side Scroller Shooter Kit

$

0

0

https://www.youtube.com/watch?v=dMFhNfkLmH4

If this doesn't work hopefully someone can tell me what I'm doing wrong. This is my first share and I'm using uTorrent.

Pluralsight – After Effects CC Rotoscoping

September 24, 2016, 1:29 am

≫ Next: TSplines

≪ Previous: Unreal - Side Scroller Shooter Kit (zip)

$

0

0

In this course, After Effects CC Rotoscoping, you will learn how to use After Effects CC to manually rotoscope out a complicated and stunning visual effect. First, you will learn how to interpret and assemble the footage in the timeline. Then, you’ll learn how to mask out the subject as he swings his sword to cut a cyberpunk robot in half. After that, you’ll learn how to rotoscope out the effect of the robot falling into two pieces, as well as additional sparks and robot insides to complete the illusion. Finally, you will learn how to finish off the project with some final touch ups applied to the effect and overall composition, and more.

TSplines

September 24, 2016, 2:01 am

≫ Next: T-Splines V4.0 for Rhino 5 64bit

≪ Previous: Pluralsight – After Effects CC Rotoscoping

$

0

0

Break free from the rigidity of traditional surface modeling approaches. Create your designs with a fast, natural and flexible workflow. Autodesk T-Splines Plug-in for Rhino helps designers create smooth, high-quality CAD models and quickly achieve the right look and feel.

http://www.tsplines.com/products/tsplines-for-rhino.html

T-Splines V4.0 for Rhino 5 64bit

September 24, 2016, 2:05 am

≫ Next: HQ Photographic Textures Grass Pack Vol.1

≪ Previous: TSplines

$

0

0

Break free from the rigidity of traditional surface modeling approaches. Create your designs with a fast, natural and flexible workflow. Autodesk T-Splines Plug-in for Rhino helps designers create smooth, high-quality CAD models and quickly achieve the right look and feel.